Pure Water Distiller Residue Cleaner

PURE WATER RESIDUE CLEANER – (Size : 500gm)

This is a solvent to dissolve the calcification of inorganic minerals deposited in the stainless steel chamber of the distiller.

Over a few rounds of water distillation, minerals deposits calcification accumulation becomes thicker and are difficult to remove through normal washing.

Instruction

1. Fill the stainless steel chamber with 4 litres of hot water.

2. Add 2 tablespoons of residue cleaner.

3. Leave the upper cover open, plug in the main power line, and turn on the power switch to heat the stainless steel tank until boiling.

4. Discard the water 15 to 20 minutes later, then wash the interior with clean water.

5. If the residue is too thick to be removed at once, repeat the above procedure several times to clean the interior thoroughly.

6. Small amount of residue is harmless, and you can continue to use the distiller safely.

Disclaimer: The contents on this page are not to be substituted for medical advice or diagnosis. The information presented here is purely for educational purpose. This is not a prescription for self-diagnosis or self-medication. Consult your own physician regarding the application of any opinions and recommendations with respect to your symptoms or medical conditions.